Which high-grade fine stone ultra-high pressure concrete pump is good, it is effective to do a good job of inspection
2024-02-26 03:06:35
The application of fine stone concrete pumps in construction is very common, especially when the high-rise construction is helpful to the construction. However, customers are more concerned about which high-level fine stone super-high pressure concrete pump is good before use, and how to buy the appropriate equipment. This editor can only suggest that the customer and the manufacturer directly contact, not through an intermediary or others Only the direct manufacturers can sell the products at the ex-factory price, and provide good after-sales and guarantee the quality of the equipment.
Putting aside the good topic of high-rise fine stone ultra-high pressure concrete pumps, how can we make the equipment construction efficient, convenient and with a low failure rate? In order to achieve this effect, the relevant inspection work can be done to make the construction more effective.
1. Inspection of electrical equipment: The inspection of electrical equipment is mainly to do the following work: 1), check whether the current and temperature rise of the motor are within the standard range; 2), check that all instruments and indicators are normal Work; 3), check and keep the electrical equipment clean and dry to avoid electric leakage and electric shock; 4), do a good job in the handling of cable wires and remote control wires to avoid damage during construction.
2. Inspection work of the conveying pipeline: each pipeline joint should be fixed and there is no gap when connecting, otherwise the leakage of aggregate will occur during the construction process, resulting in waste of resources. If this point is not taken seriously before, it is necessary to suspend construction and dismantle and repair immediately when the fault occurs.
3. The inspection work of the hydraulic system: 1) Check the oil level, oil quality and oil temperature of the hydraulic oil tank to meet the requirements of the construction; 2) Check the loss of all valves in the hydraulic system and ensure energy storage The device, pressure gauge, etc. all work normally and correctly reflect the construction pressure value; 3). Connect and fix the hydraulic pipeline so that there will be no leakage of concrete aggregate during the construction process.
The high-level fine stone ultra-high pressure concrete pump is better, the responsible manufacturer will make the construction guaranteed. Therefore, the user can appropriately raise some problems in the construction to test the ability of the manufacturer when choosing, if the experienced manufacturer should be able to solve any problems well. This is also an important method to test the manufacturer's production capacity and operating experience.
================================================== ================================================== ======
15365198506
Ningbo Wason Lighting Technology Co.,Ltd , https://www.wasonlights.com