What is the cause of scratching glazed tiles? Glazed tile scratch treatment method
How many people in the home are using glazed tiles to decorate the house, but how do we deal with the glazed tile scratches? How to deal with the glazed tile scratches depends on how our polished glazed tiles are scratched. Things, what are the reasons that our friends have to face this glazed brick scratches how to deal with things, our small series now to solve for everyone, how to deal with this glazed tile scratches how to deal with What is the method.
First, the cause of scratching the glazed brick
1. No protection during construction
During the construction of the family, all kinds of sand, stones, people come and go, all kinds of heavy things moved in and out. Tiles, especially full glaze and microcrystalline stone, have a glassy crystal glaze on the surface for a better decorative effect, and the Mohs hardness is 4-6. The composition of the sand is quartz (silica SiO2) with an average Mohs hardness of 7. If the pre-construction is not well protected, it is easy to produce scratches!
2, indoors do not pay attention to change shoes
The wear resistance of ceramic tiles far exceeds that of stone, glass and wood flooring, and it is one of the best decorative materials. On rainy days, there will be a lot of quartz sand stuck to the sole, which is equivalent to a person who uses the weight of the whole body to tile the glaze.
3, do not pay attention to indoor mopping
Quartz sand is a small, transparent granule that is difficult to remove when sweeping the floor and will remain under the legs of the refrigerator, sofa, table, and cabinet. Due to the heavy weight of the refrigerator and the cabinet, a movement will drive the quartz sand to engrave the brick surface, even if the jade will produce scratches!
Second, how to deal with the glaze brick scratches
1, wiping method: For tile scratches are not serious, you can apply toothpaste, use a soft cloth to rub hard, the effect should be good.
2, smear method: find some paint similar to the color of the tile, smeared onto the tile.
3, replacement method: If the tile scratches are more serious, you can replace it with new tiles to ensure the overall tile is beautiful.
4, the full polished glazed tile is different from the ordinary polished brick, the surface of the glaze is a special crystal wear-resistant glaze, the molecule is completely sealed after high-temperature sintering, almost no gap, can maintain high brightness for a long time, not faint, hard and wear-resistant, will The tiles become more luminous, and the decoration makes the house more beautiful, bright and magnificent.
5. If you use nail polish, wipe the tile clean before wiping, so the effect will be better.
6, the waxing method is also OK, this can play a role in reducing the scratches of the tile.
7, with oxalic acid to repair the scratches of the tile effect is good, the specific operation method is: use a soft rag dipped in oxalic acid, wipe with a force to repair the tile scratches.
8, for the tile scratches are more serious, it is a hard injury, can only be polished with water sandpaper, but this method is not recommended, because it is very damage to the tile.
The above content is some solutions to how our glazed tile scratches are handled, and Xiaobian also explains why you need friends to learn how to deal with this glazed tile scratch, then we need to do the glaze What are the reasons for how brick scratches are handled. Not only this, but now our decoration home network has a lot of decorative information, friends continue to pay attention.
The elevator guide shoe
Elevator guide shoe is a sliding part between elevator guide rail and car, what we call it guide shoe. It can fix the car on the guide rail and make car running up and down. Oil cup upper the elevator guide shoe that can reduce the friction of the shoe line and guide rail. There are four sets of guide shoes installed in each unit, respectively on both sides of the upper beam and under the safety clamp seat at the bottom of the car; and also four sets counter weight guide shoes are mounted on the bottom and top of the beam.
The guide shoes fixed on the car can move up and down along the fixed guide rail installed on the wall of the well way of the building to prevent the car from deviating or swinging in operation.
Guide shoe installation requirements
The installation method of guide shoe is to put it on the installation position of the guide rail of the car frame. After finding the right position, use the bolt fix it on the car guide rail frame. The installation must meet the following requirements:
- When the upper and lower guide shoes are installed in the right position, they should be on the same vertical line. No slant or deflection is allowed. Both roller guide shoes and fixed guide shoes same requirement.
- Fixed guide shoes are mainly used for FOVF units, the clearance between the two sides should be consistent, and the clearance between the inner lining and the rail top should be within O. 5 ~ 2 mm
-
Guide shoe,elevator Guide shoe,lift Guide shoe,casting Guide shoe liner
Suzhou Keffran Parts Co.,ltd , https://www.keffran-elevatorsmart.com