Teach you five ways to choose high quality sanitary ware
The new standard specifies the general technical requirements, flushing functions, and test methods. However, for consumers, how to pick a good ware should pay attention to the following aspects.
>>>Related Links: Remember to buy five sets of sanitary ware
1. Quality is only qualified. The appearance quality and deformation index have been changed accordingly in this new standard. The appearance of the product was visually inspected from the original light intensity of 300LX at a distance of 0.5m from the product, and was changed to a visual inspection at an illumination intensity of 1100LX from the product at 0.6m; The deformation index was increased to a maximum of 6 mm, while the original standard surface deformation of 5 mm and the overall deformation of 8 mm were also retained. At the same time, as long as it satisfies certain criteria, its products will be manufactured at a level of qualified products, eliminating the provisions for the original qualified products and superior products.
2. The amount of water used for toilets is clearly defined. Water-saving toilets require no more than 6 liters of water, 9 liters of ordinary water, water-saving squat toilets should not exceed 8 liters of water, and ordinary types should not exceed 11 liters.
3. The surface area of ​​the toilet water seal shall not be less than 100 x 85 mm. In the previous standard, there was no clear definition of the surface area of ​​the water seal, and the purpose of this new increase is to achieve a better deodorant effect.
4. Toilet bowl water seal depth should be 50 mm, water seal recovery should be more than 50 mm, regardless of the change in the bottom curvature of the toilet, the depth of the water seal should be maintained at 50 mm or more, and when the flush is completed, water The reply of the seal should also be kept above 50 mm.
5. The matching requirements and the anti-siphon function of the flushing device are also clearly defined. Its main role is to ensure that in case of negative pressure such as water stoppage, water in the storage tank cannot be reversed to prevent contamination of the water source.
Ware purchase
LED plant grow lamp is a kind of artificial light source which takes LED(light-emitting diode) as the luminous body and meets the light conditions required by plant photosynthesis.
Indoor Planting Growing,Warranty Grow Light,Indoor Plants Grow Light LED,Indoor Plant Grow Light
Jilin Province Wanhe light Co.,Ltd , https://www.wanhelight.com