Plastic floor maintenance
2023-04-02 11:08:04
First, the purpose of plot maintenance 1. To improve the appearance: timely removal of dirt generated in daily use, so that the elastic floor to fully demonstrate its extraordinary appearance and natural gloss.
2. Protect the floor: protect the flexible floor from the accidental chemicals, cigarette traces, shoe prints, oil and water, minimize the mechanical wear on the surface, and make the durability of the floor itself fully utilized, thus extending the floor The service life.
3. Convenient care: Due to the tight surface structure and special treatment of the flexible floor itself, attention is paid to the daily cleaning and maintenance, which can make the floor easier to care and prolong the service life.
Second, care precautions 1. The ground should be cleared of all kinds of dirt.
2. It is absolutely forbidden to soak the floor in bright water, although some floors use waterproof glue to cut off the water source (such as floor drain, water room, etc.), but being soaked in water for a long time will seriously affect the service life of the floor. During the cleaning process, the sewage is sucked dry with a suction machine.
3. The maintenance cycle should be shortened for places where there are many people and where there is a lot of wear, and the number of times of waxing of high-strength wax be increased.
4. Absolutely prohibit the use of hard, rough cleaning tools (such as steel balls, scouring pads, etc.) to prevent sharp objects from colliding with the floor.
5. It is strongly recommended to place a snorkeling pad at the entrance of a public place with a high flow of people so as to prevent dirt and sand from being contaminated.
Third, different stages of conservation methods:
(A) after laying the floor / use before cleaning and maintenance 1. First remove dust and debris on the floor surface.
2. Use a grazing machine to add 3M red laps or similar products at a low speed to clean (dilute with strong strong universal cleaner diluted 1:20 and add to the grazing machine) to remove the protective wax, grease, dust and other dirt on the floor surface. Use a suction machine to suck up the sewage.
3. Wash with clean water and blot dry.
4. As required, 1-2 layers of high-strength wax.
Cleaner: Powerful Universal Cleaner High-strength wax tool: Grinding machine Red-grinding machine Water-absorbing machine Wax press water machine (b) Daily cleaning and maintenance 1. Push the dust or vacuum cleaner to clean the dust. (Tow the dust on the floor, dry it, and push it.)
2. Wet tow. (Diluting with a floor cleaning polish diluted 1:20 with water and using a semi-moist mop to mop the floor.) If necessary, use a grazing machine with wash & shine for low speed cleaning.
Detergents: Mop Dust Cleaner Floor Polishing Polishing Tools: Dust Pushing Mop (3) Regular Cleaning and Maintenance 1. Push the dust or the vacuum cleaner.
2. The floor cleaning polish is diluted 1:20 with water, mopping or with a high-speed polisher and red polishing.
3. On the 1-2 layer high-strength wax.
4. As needed, it can be combined with high-speed polishing machine and white polishing pad.
Cleaner: floor cleaning polish high-strength wax tool: push grinding machine red, white polishing machine water suction machine wax press water machine (d) completely refurbished processing 1. Push the dust or vacuum cleaner vacuum.
2. Use strong force to remove wax water diluted 1:10 and spread it evenly on the ground. Wait 5-10 minutes. Use a wiping machine and red polishing plate to clean and wax at low speed. In a timely manner, the sewage is drained with a suction machine.
3. Wash and dry with clean water until no residual detergent is left on the floor.
4. As required, 1-2 layers of high-strength wax.
Cleaner: floor cleaning polish high-strength wax tool: dust mill grinding machine red, white polishing machine water suction machine wax drag machine (V) special dirt treatment 1. Oil pollution: partial oil, the water degreasing agent stock solution Rub directly on the towel; Large area of ​​oil, the only special water-based degreasing agent 1:10 dilution, wipe with a red polishing machine to clean the low speed.
2. Black offset printing: Use spray cleaning wax with high-speed polishing machine and white polishing pad to polish. For a long time black offset printing, a strong black offset remover can be poured directly onto the towel and wiped.
3. Gum or chewing gum: pour it directly onto a towel and remove it with a professional strong glue remover.
Cleaner: Water-based degreasing agent spray cleaning maintenance wax strong black offset printing remover strong glue.
Pvc sports floor maintenance methods sports floor due to the shoes and easy to leave black, dirty, making sports venues bear heavy and expensive maintenance costs. UV mesh surface treatment has been added during the production process. This technique makes it easier to remove shoe prints while cleaning the floor, while also protecting the appearance of the sports floor and extending its useful life.
We use special rubber and resin products to remove rubber shoes and other dirt. This chemical cleaning method can effectively remove dirt without damaging the floor itself. We can also use professional cleaning sprays and common detergents to clean the dirt.
â—†Reduce maintenance costs Due to the application of simple and quick cleaning features, the maintenance of the sports floor can achieve significant savings in the following aspects:
- Time-saving - Provincial materials - The overall health treatment of laborers in the face of higher safety requirements, sports flooring has also been antibacterial treatment. This treatment is applied to the entire flooring material system, including foaming materials and surface layers. This is done to reduce the risk of people getting an infection in any accidental injury situation.
â—†Attention The clean floor must be started 72 hours after the floor is laid. Do not use black rubber rollers or pads when laying. Use pvc or polyethylene rollers or pads.
Surface Sports Venue Installation Instructions Mechanical Cleaning, Self-Cleaning Cleaner or Drum Cleaner + Red Cleaning Plate + Neutral or Alkaline Detergent Protected No Daily Cleaning Dry, Wet Cleaning Regular Cleaning (Not Less Than 1 Week 1 time) Mechanical cleaning, using a self-cleaning cleaner or a drum cleaner + red cleaning plate + neutral or non-alkaline detergent regular shoeprint cleaning (not less than once a month) smear removal with shoe print 5 minutes after the dirty place, use the self-cleaning washing machine for mechanical cleaning + red cleaning plate installation and maintenance
Installation and maintenance of grass-roots requirements:
The ground floor of the construction site must be clean, long-lasting, clean, flat, sand-free, non-wrinkle-free, and free of cracks. The concrete floor moisture content cannot exceed 2.5%. Gypsum ground water content must not exceed 0.5%. Before laying the floor. After the floor is dusted, pvc coils can be laid. If the original ground is uneven, 2mm self-leveling can also be applied. If it is a non-absorbent surface such as mineral base, stone, tile, etc., can be directly paved.
Note: If it is a wet floor such as a basement, the floor must be waterproofed to isolate moisture. Mobile installation 1. The floor and the floor are bonded together with a dedicated connecting belt for the manufacturer. The floor and the floor are not bonded. Feel free to roll up or remove pvc plastic floor to facilitate labor-saving installation.
2. Partial bonding: Inward 20 cm of adhesive is applied on the ground with the edge of the floor as a reference.
3. Full plastic bonding: All the glue on the floor to be laid.
1. Laying the ground must be smooth and clean.
2. Before the sports floor is laid, it must be laid out in advance on the laying ground for more than 24 hours, and the on-site temperature should not be lower than 15°C. After the floor is restored, leave 5cm more at both ends when cutting. Before spreading, roll the unrolled floor in about half, and then apply the squeegee—starting from the middle—with glue with a squeegee.
3. According to the floor numbering sequence, align and merge, pay attention to align the field line during the paving process.
4. Open the adjacent two floors along the joints, and put the special connecting belt provided by the manufacturer on the underside of the joint. Brush the glue on the surface of the joint. First stick one of the boards to the half joint, and then The other half is glued to the rest of the connecting tape and the gap can be closed.
5. It is recommended to use water-soluble glue that is harmless to the human body. When the floor is glued, use a cork block to squeeze the floor surface from the middle to the both ends to make it flat without any bubbles, and roll it flat completely.
Regular maintenance will keep the floor surface as it is and extend the life of the floor. The period of maintenance depends on natural conditions and intensity of use.
The floor must be cleaned daily with a mop or with a vacuum cleaner to remove dust from the surface. A small area can be cleaned manually. A medium-sized area can be cleaned with a grazing machine.
Do not use cleaning equipment that will cause wear on the floor. Use neutral detergent when cleaning. Wash after washing with clean water and dry or dry the floor. This will prevent sedimentation.
Footprints and stains should be immediately removed with appropriate cleaning methods.
The vast majority of sports flooring has a field line (painted on the surface or attached to the surface). When the floor is maintained, it must be strengthened to maintain it so that the site line will not be destroyed and moved.
Door mats should be placed at the entrance of places with large people flow. 1. It is forbidden to wear leather shoes, high-heeled shoes or colored shoes. 2. Cutting and squeezing are strictly prohibited. The surface should not be rubbed with hard objects to avoid damage and destruction. 3. It is forbidden to use corrosive chemical agents such as acid and alkali on the floor, and keep away from fire and high temperature to avoid deformation of the floor.
Maintenance Note: When I visited the pvc floor users, I found that many customers use pvc flooring, pvc floor as marble, tile use, do not know how to maintain the floor maintenance knowledge, resulting in pvc floor damage, pollution and other issues. What should we pay attention to when using pvc flooring?
1, sand protection: should be in the use of pvc floor room door, the hall entrance to place a protective mat of sand and gravel, to prevent the shoes will be brought into the room to sand the surface of the floor scratch;
2. Handling of articles: When carrying articles, especially when there are metal sharp objects at the bottom, do not pull on the floor to prevent floor injuries; 3, pyrotechnic protection: Although the pvc floor is fire rated as flame retardant (B1 level) The floor, does not mean that the floor will not be burned by fireworks, so people in the use of pvc flooring, do not burn the cigarette butts, mosquito coils, charged iron, high temperature metal objects directly on the floor above, to prevent damage to the floor;
4, regular floor maintenance: pvc floor cleaning using neutral detergent cleaning, can not use strong acid or alkali cleaner to clean the ground, do a good job of regular cleaning and maintenance work; a, daily maintenance: use clean 90% mop to clean the ground , Partially clean to the serious pollution; b, month maintenance: The ground cleans, the local foundation damages the ground to wax the processing. In particular, homogenous pvc flooring is generally treated with wax once a month for floor care;
5, pollution treatment: stained ink on the pvc floor, food, oily, etc. should be wiped dirt, and then wipe with a dilute detergent traces, the residue of the black leather shoes India is difficult to remove the veil can be used to touch the pine scrub, can not be The pine perfume is poured on the floor to clean it.
6, Note: Floor cleaning can not use clean ball, knife scraping, can not use conventional methods to clean the dirt, consult relevant parties, can not mess with the use of acetone, toluene, and other chemicals;
7, chemical protection: to avoid a large amount of water stay on the floor surface for a long time, especially the block floor, homogenous floor, the water soaked the floor for a long time, may seep into the floor below the floor glue to lose the adhesive force, it may also Makes the floor surface of the protective wax moisture layer cause floor pollution, and may also cause sewage to penetrate into the floor to cause floor discoloration (homogeneous floor);
8, sun protection: Avoid direct exposure to bright light, make the floor to put ultraviolet radiation, to prevent the floor discoloration, fading.
2. Protect the floor: protect the flexible floor from the accidental chemicals, cigarette traces, shoe prints, oil and water, minimize the mechanical wear on the surface, and make the durability of the floor itself fully utilized, thus extending the floor The service life.
3. Convenient care: Due to the tight surface structure and special treatment of the flexible floor itself, attention is paid to the daily cleaning and maintenance, which can make the floor easier to care and prolong the service life.
Second, care precautions 1. The ground should be cleared of all kinds of dirt.
2. It is absolutely forbidden to soak the floor in bright water, although some floors use waterproof glue to cut off the water source (such as floor drain, water room, etc.), but being soaked in water for a long time will seriously affect the service life of the floor. During the cleaning process, the sewage is sucked dry with a suction machine.
3. The maintenance cycle should be shortened for places where there are many people and where there is a lot of wear, and the number of times of waxing of high-strength wax be increased.
4. Absolutely prohibit the use of hard, rough cleaning tools (such as steel balls, scouring pads, etc.) to prevent sharp objects from colliding with the floor.
5. It is strongly recommended to place a snorkeling pad at the entrance of a public place with a high flow of people so as to prevent dirt and sand from being contaminated.
Third, different stages of conservation methods:
(A) after laying the floor / use before cleaning and maintenance 1. First remove dust and debris on the floor surface.
2. Use a grazing machine to add 3M red laps or similar products at a low speed to clean (dilute with strong strong universal cleaner diluted 1:20 and add to the grazing machine) to remove the protective wax, grease, dust and other dirt on the floor surface. Use a suction machine to suck up the sewage.
3. Wash with clean water and blot dry.
4. As required, 1-2 layers of high-strength wax.
Cleaner: Powerful Universal Cleaner High-strength wax tool: Grinding machine Red-grinding machine Water-absorbing machine Wax press water machine (b) Daily cleaning and maintenance 1. Push the dust or vacuum cleaner to clean the dust. (Tow the dust on the floor, dry it, and push it.)
2. Wet tow. (Diluting with a floor cleaning polish diluted 1:20 with water and using a semi-moist mop to mop the floor.) If necessary, use a grazing machine with wash & shine for low speed cleaning.
Detergents: Mop Dust Cleaner Floor Polishing Polishing Tools: Dust Pushing Mop (3) Regular Cleaning and Maintenance 1. Push the dust or the vacuum cleaner.
2. The floor cleaning polish is diluted 1:20 with water, mopping or with a high-speed polisher and red polishing.
3. On the 1-2 layer high-strength wax.
4. As needed, it can be combined with high-speed polishing machine and white polishing pad.
Cleaner: floor cleaning polish high-strength wax tool: push grinding machine red, white polishing machine water suction machine wax press water machine (d) completely refurbished processing 1. Push the dust or vacuum cleaner vacuum.
2. Use strong force to remove wax water diluted 1:10 and spread it evenly on the ground. Wait 5-10 minutes. Use a wiping machine and red polishing plate to clean and wax at low speed. In a timely manner, the sewage is drained with a suction machine.
3. Wash and dry with clean water until no residual detergent is left on the floor.
4. As required, 1-2 layers of high-strength wax.
Cleaner: floor cleaning polish high-strength wax tool: dust mill grinding machine red, white polishing machine water suction machine wax drag machine (V) special dirt treatment 1. Oil pollution: partial oil, the water degreasing agent stock solution Rub directly on the towel; Large area of ​​oil, the only special water-based degreasing agent 1:10 dilution, wipe with a red polishing machine to clean the low speed.
2. Black offset printing: Use spray cleaning wax with high-speed polishing machine and white polishing pad to polish. For a long time black offset printing, a strong black offset remover can be poured directly onto the towel and wiped.
3. Gum or chewing gum: pour it directly onto a towel and remove it with a professional strong glue remover.
Cleaner: Water-based degreasing agent spray cleaning maintenance wax strong black offset printing remover strong glue.
Pvc sports floor maintenance methods sports floor due to the shoes and easy to leave black, dirty, making sports venues bear heavy and expensive maintenance costs. UV mesh surface treatment has been added during the production process. This technique makes it easier to remove shoe prints while cleaning the floor, while also protecting the appearance of the sports floor and extending its useful life.
We use special rubber and resin products to remove rubber shoes and other dirt. This chemical cleaning method can effectively remove dirt without damaging the floor itself. We can also use professional cleaning sprays and common detergents to clean the dirt.
â—†Reduce maintenance costs Due to the application of simple and quick cleaning features, the maintenance of the sports floor can achieve significant savings in the following aspects:
- Time-saving - Provincial materials - The overall health treatment of laborers in the face of higher safety requirements, sports flooring has also been antibacterial treatment. This treatment is applied to the entire flooring material system, including foaming materials and surface layers. This is done to reduce the risk of people getting an infection in any accidental injury situation.
â—†Attention The clean floor must be started 72 hours after the floor is laid. Do not use black rubber rollers or pads when laying. Use pvc or polyethylene rollers or pads.
Surface Sports Venue Installation Instructions Mechanical Cleaning, Self-Cleaning Cleaner or Drum Cleaner + Red Cleaning Plate + Neutral or Alkaline Detergent Protected No Daily Cleaning Dry, Wet Cleaning Regular Cleaning (Not Less Than 1 Week 1 time) Mechanical cleaning, using a self-cleaning cleaner or a drum cleaner + red cleaning plate + neutral or non-alkaline detergent regular shoeprint cleaning (not less than once a month) smear removal with shoe print 5 minutes after the dirty place, use the self-cleaning washing machine for mechanical cleaning + red cleaning plate installation and maintenance
Installation and maintenance of grass-roots requirements:
The ground floor of the construction site must be clean, long-lasting, clean, flat, sand-free, non-wrinkle-free, and free of cracks. The concrete floor moisture content cannot exceed 2.5%. Gypsum ground water content must not exceed 0.5%. Before laying the floor. After the floor is dusted, pvc coils can be laid. If the original ground is uneven, 2mm self-leveling can also be applied. If it is a non-absorbent surface such as mineral base, stone, tile, etc., can be directly paved.
Note: If it is a wet floor such as a basement, the floor must be waterproofed to isolate moisture. Mobile installation 1. The floor and the floor are bonded together with a dedicated connecting belt for the manufacturer. The floor and the floor are not bonded. Feel free to roll up or remove pvc plastic floor to facilitate labor-saving installation.
2. Partial bonding: Inward 20 cm of adhesive is applied on the ground with the edge of the floor as a reference.
3. Full plastic bonding: All the glue on the floor to be laid.
1. Laying the ground must be smooth and clean.
2. Before the sports floor is laid, it must be laid out in advance on the laying ground for more than 24 hours, and the on-site temperature should not be lower than 15°C. After the floor is restored, leave 5cm more at both ends when cutting. Before spreading, roll the unrolled floor in about half, and then apply the squeegee—starting from the middle—with glue with a squeegee.
3. According to the floor numbering sequence, align and merge, pay attention to align the field line during the paving process.
4. Open the adjacent two floors along the joints, and put the special connecting belt provided by the manufacturer on the underside of the joint. Brush the glue on the surface of the joint. First stick one of the boards to the half joint, and then The other half is glued to the rest of the connecting tape and the gap can be closed.
5. It is recommended to use water-soluble glue that is harmless to the human body. When the floor is glued, use a cork block to squeeze the floor surface from the middle to the both ends to make it flat without any bubbles, and roll it flat completely.
Regular maintenance will keep the floor surface as it is and extend the life of the floor. The period of maintenance depends on natural conditions and intensity of use.
The floor must be cleaned daily with a mop or with a vacuum cleaner to remove dust from the surface. A small area can be cleaned manually. A medium-sized area can be cleaned with a grazing machine.
Do not use cleaning equipment that will cause wear on the floor. Use neutral detergent when cleaning. Wash after washing with clean water and dry or dry the floor. This will prevent sedimentation.
Footprints and stains should be immediately removed with appropriate cleaning methods.
The vast majority of sports flooring has a field line (painted on the surface or attached to the surface). When the floor is maintained, it must be strengthened to maintain it so that the site line will not be destroyed and moved.
Door mats should be placed at the entrance of places with large people flow. 1. It is forbidden to wear leather shoes, high-heeled shoes or colored shoes. 2. Cutting and squeezing are strictly prohibited. The surface should not be rubbed with hard objects to avoid damage and destruction. 3. It is forbidden to use corrosive chemical agents such as acid and alkali on the floor, and keep away from fire and high temperature to avoid deformation of the floor.
Maintenance Note: When I visited the pvc floor users, I found that many customers use pvc flooring, pvc floor as marble, tile use, do not know how to maintain the floor maintenance knowledge, resulting in pvc floor damage, pollution and other issues. What should we pay attention to when using pvc flooring?
1, sand protection: should be in the use of pvc floor room door, the hall entrance to place a protective mat of sand and gravel, to prevent the shoes will be brought into the room to sand the surface of the floor scratch;
2. Handling of articles: When carrying articles, especially when there are metal sharp objects at the bottom, do not pull on the floor to prevent floor injuries; 3, pyrotechnic protection: Although the pvc floor is fire rated as flame retardant (B1 level) The floor, does not mean that the floor will not be burned by fireworks, so people in the use of pvc flooring, do not burn the cigarette butts, mosquito coils, charged iron, high temperature metal objects directly on the floor above, to prevent damage to the floor;
4, regular floor maintenance: pvc floor cleaning using neutral detergent cleaning, can not use strong acid or alkali cleaner to clean the ground, do a good job of regular cleaning and maintenance work; a, daily maintenance: use clean 90% mop to clean the ground , Partially clean to the serious pollution; b, month maintenance: The ground cleans, the local foundation damages the ground to wax the processing. In particular, homogenous pvc flooring is generally treated with wax once a month for floor care;
5, pollution treatment: stained ink on the pvc floor, food, oily, etc. should be wiped dirt, and then wipe with a dilute detergent traces, the residue of the black leather shoes India is difficult to remove the veil can be used to touch the pine scrub, can not be The pine perfume is poured on the floor to clean it.
6, Note: Floor cleaning can not use clean ball, knife scraping, can not use conventional methods to clean the dirt, consult relevant parties, can not mess with the use of acetone, toluene, and other chemicals;
7, chemical protection: to avoid a large amount of water stay on the floor surface for a long time, especially the block floor, homogenous floor, the water soaked the floor for a long time, may seep into the floor below the floor glue to lose the adhesive force, it may also Makes the floor surface of the protective wax moisture layer cause floor pollution, and may also cause sewage to penetrate into the floor to cause floor discoloration (homogeneous floor);
8, sun protection: Avoid direct exposure to bright light, make the floor to put ultraviolet radiation, to prevent the floor discoloration, fading.
Stainless Steel Lifting Hook,Swivel Lifting Hook,Heavy Duty Lifting Hooks,Crane Lifting Hook
Jiangsu Dingtian Stainless Steel Products Co., Ltd. , https://www.dingtiancasting.com