Industrial oven use precautions
1. Pay attention to cleaning when using the electric oven for the first time.
Wipe the inside and outside of the oven with a clean damp cloth to remove some dust. It can then be baked in the oven for a while, and sometimes white smoke may appear, which is normal. Pay attention to ventilation and heat dissipation after baking. After waiting for cooling, you can scrub the inner wall of the furnace again with clean water.
2. After cleaning, you can use the electric oven normally.
Before baking any food, the oven must be preheated to the specified temperature to meet the baking time on the recipe. Preheating the oven takes about 10 minutes. If the oven is preheated for too long, it may affect the life of the oven.
3. The oven being heated should avoid burns
In addition to the internal high temperature, the outer casing and the glass door are also very hot, so be careful when opening or closing the oven door to avoid being burnt by the glass door. When placing the baking tray in the oven or removing it from the oven, be sure to use the handle. Do not touch the baking tray or the baked food directly with your hands. Do not touch the heater or other parts of the oven cavity to avoid burns.
4. When the oven is in use, the temperature should be adjusted first.
When the oven is in use, first adjust the temperature to get angry and under fire, and adjust the fire up and down. Then turn the time knob clockwise (do not turn it counterclockwise). At this time, the power indicator light is on, which proves that the oven is working. status. In the course of use, if we set the food for 30 minutes, but after observation, the food will be baked in 20 minutes, then we should not turn the time knob counterclockwise at this time, please adjust the fire position in the middle of the three knobs to close. That's it, this will extend the life of the machine. This is different from the use of microwave ovens, which can be reversed.
5. It should be cleaned after each use.
It should be noted that when cleaning the door of the box and the shell of the oven, apply a dry cloth to wipe it. Do not wash it with water. In case of dirt that is difficult to remove, it can be wiped off with detergent. Other accessories for the electric oven, such as baking trays, grilled nets, etc., can be washed with water.
6. The oven must be placed in a ventilated place
Don't lean too close to the wall to ease heat. And the oven is best not to be placed close to the water source, because the overall temperature of the oven is very high during work, if it encounters water, it will cause temperature difference.
7. When the oven is working, don't stay in front of the oven for a long time.
Don't stay in front of the oven for a long time. If the glass door of the oven is found to be cracked, stop using it immediately.
Cell Culture plates provide the right environmental surface to cultivate microorganisms. Choose from a variety of treated and untreated plates and dishes in multiwells or uniform flat bases. Some of the features include optically-clear for easily viewing cells, stacking beads for easier handling, and gamma sterilized and certified nonpyrogenic.
Product material: made of polystyrene
Product features: Each hole is marked with numbers and letters, which is easy to locate. One section of the plate cover has two bevel guides to prevent cross-contamination.
Features:
Easy to locate: alphanumeric labeling
Increased hole edges: reduces the risk of cross-contamination
Independent packaging: each culture plate is individually packaged
The tightly integrated hole cover can effectively prevent the contamination and evaporation loss of the medium during the cell culture process
Good stability: Innovative cover edge diversion design, which greatly improves the circulation and exchange of air in the plate
24 Well Plate,Cell Culture Plate,6 Well Plate,12 Well Plate,96 Well Plate Cell Culture
Yong Yue Medical Technology(Kunshan) Co.,Ltd , https://www.yonyuetube.com