Hyva Single Acting Hydraullic Cylinder Telescopic Used in Dump Truck

Features:
a. Every DALLAST single acting telescopic cylinder is individually tested before leaving our plant to assure proper performance and leak-free operation. All cylinder products carry an 12 months warranty.
b. Snap on glass filled bearings that absorb contaminants without damaging cylinder walls.
c. Nylon tipped set screws that conform to packing nut threads to decrease the probability of packing
nuts backing off.
d. Single-acting cylinders transfer force and motion in one direction only.

e. Lighter weight: TG series oil cylinder is lighter than similar product 17.9%, lower cost and fewer oil consumption.

f. Higher efficiency: Smaller cylinder diameter makes the smaller working volume, the speed of oil cylinder lifting and falling are more fast and more efficiency, running more can bring more benefits.

g. Stronger weather resistance: The application new materials and special structures can adapt to different environment from cold to hot and can round-clock operation.

h. Better performance: Imported high quality materials and spare parts make outstanding products performance. Precision of the system structure design, lean manufacturing and long service life can bring a lot of benefits to customers.

 

Introduction&Application:
1. Truck front lifting cylinder is the dumper hydralic lifting system for lifting actuator, truck compartment or tank.

2. It mainly used in various types of heavy truck front lifting, such as 8*4 truck, semi-trailer, can be widely used in mining, iron and steel, port conditions relatively poor use places can meet from13 tons to 90 tons lifting requirements.
3. There are many benefits to using a single acting cylinder. It's the ideal choice for applications where gravity, weight or other assisting forces are present to move the cylinder in one direction. It could be mounted in any position so that it could be used in a wide range of mobile and industrial applications.

 

 Piston Seals:
Low friction, high load piston seals with outboard wear bands are standard. Loaded lip seals and cast iron rings are optional.

About piston rod:

High strength damage resistant piston rod provides 100,000 PSI minimum yield material in 1" through 4 1/2" diameters. Larger diameters vary between 50,000 and 75,000 PSI minimum yield material. All rods are case hardened to 50-55 RC and hard chrome plated to provide maximum wear life. Stainless steel is also available. The hard chrome plated of the piston rod according to your requirement.

 

Mounting option:
It has FC, FE, FEE.

 

                                                          Single Acting Telescopic Hydraulic Cylinder
 

Any types of Engineering Machinery Model could be designed according to your requirement.
If you're interested in our products, please contact with us.


Certification 



 Processing Equipment

                      




FAQ:

1.Are you a manufacturer?

We are professional manufacturer in hydraulic. We will provide competitive price.

2.What is your warranty?

Our products are all available for one-year free warranty and product lifetime consulting service.

3.How to ship your products?

We are transported by sea, by air or by international express.

4. Do you support OEM service?

Yes. OEM service is available.

5. Is your design reasonable?

We have professional R&D team with rich design experience.

 

 

 

Features:
a. Every DALLAST single acting telescopic cylinder is individually tested before leaving our plant to assure proper performance and leak-free operation. All cylinder products carry an 12 months warranty.
b. Snap on glass filled bearings that absorb contaminants without damaging cylinder walls.
c. Nylon tipped set screws that conform to packing nut threads to decrease the probability of packing
nuts backing off.
d. Single-acting cylinders transfer force and motion in one direction only.

e. Lighter weight: TG series oil cylinder is lighter than similar product 17.9%, lower cost and fewer oil consumption.

f. Higher efficiency: Smaller cylinder diameter makes the smaller working volume, the speed of oil cylinder lifting and falling are more fast and more efficiency, running more can bring more benefits.

g. Stronger weather resistance: The application new materials and special structures can adapt to different environment from cold to hot and can round-clock operation.

h. Better performance: Imported high quality materials and spare parts make outstanding products performance. Precision of the system structure design, lean manufacturing and long service life can bring a lot of benefits to customers.

 

Introduction&Application:
1. Truck front lifting cylinder is the dumper hydralic lifting system for lifting actuator, truck compartment or tank.

2. It mainly used in various types of heavy truck front lifting, such as 8*4 truck, semi-trailer, can be widely used in mining, iron and steel, port conditions relatively poor use places can meet from13 tons to 90 tons lifting requirements.
3. There are many benefits to using a single acting cylinder. It's the ideal choice for applications where gravity, weight or other assisting forces are present to move the cylinder in one direction. It could be mounted in any position so that it could be used in a wide range of mobile and industrial applications.

 

 Piston Seals:
Low friction, high load piston seals with outboard wear bands are standard. Loaded lip seals and cast iron rings are optional.

About piston rod:

High strength damage resistant piston rod provides 100,000 PSI minimum yield material in 1" through 4 1/2" diameters. Larger diameters vary between 50,000 and 75,000 PSI minimum yield material. All rods are case hardened to 50-55 RC and hard chrome plated to provide maximum wear life. Stainless steel is also available. The hard chrome plated of the piston rod according to your requirement.

 

Mounting option:
It has FC, FE, FEE.

 

                                                          Single Acting Telescopic Hydraulic Cylinder
 

Any types of Engineering Machinery Model could be designed according to your requirement.
If you're interested in our products, please contact with us.


Certification 



 Processing Equipment

                      




FAQ:

1.Are you a manufacturer?

We are professional manufacturer in hydraulic. We will provide competitive price.

2.What is your warranty?

Our products are all available for one-year free warranty and product lifetime consulting service.

3.How to ship your products?

We are transported by sea, by air or by international express.

4. Do you support OEM service?

Yes. OEM service is available.

5. Is your design reasonable?

We have professional R&D team with rich design experience.

 

 

 

Atv Winch

Atv Winch,Small Electric Winch,Waterproof Atv Winch,Multifuctional Electric Winch

JINHUA RUNHUA CO.,LTD , https://www.cnirunwinch.com