Hui Xu Ultrafine Powder Coatings Launches
Hui Xu Shanghai Co., Ltd. was established in 2001 and specializes in the research and development of high-tech industrialization. It is also the first wholly-owned production entity in China to produce high-tech coatings. The factory currently employs about 100 people, plant 8,000 square meters, production of liquid coatings, ultra-fine powder coatings and other high-tech paint products. Shanghai company's products are not only sold in the Chinese market but also exported to Singapore, India, and the Middle East. Hui Xu Foshan Co., Ltd. was established in 2008 to meet the needs of fast delivery of customers in the Guangdong region. Foshan Huixu has already begun formal production, and has improved various high-performance ultra-fine powder coatings for customers such as the largest aluminium profile plant in Asia.
In December 2008, Huixu Foshan Company began to produce powdered fluorocarbon coatings to meet the needs of Asian aluminum and other Guangdong customers. The company decided to produce powdered fluorocarbon coatings at Foshan. Powder fluorocarbon coatings are a successful example of the application of ultrafine powder coating technology to the production of powdered fluorocarbon coatings. Ultrafine powder technology has reduced the coating thickness of fluorocarbon powder from 60-80 micrometers to 30-40 micrometers, which greatly reduces the cost of fluorocarbon coating while greatly improving the quality. High-quality, low-cost powdered fluorocarbon coatings are an inevitable trend and will replace all liquid fluorocarbon coatings sooner or later. Their customers believe that prioritizing the use of powdered fluorocarbon coatings will provide the benefits of advanced technologies, and that the forced use of powder coatings after two or three years will not necessarily benefit.
1. Correct selection of teeth
1) Before use, confirm whether the mechanical properties of the product meet the customer's requirements (such as the tensile strength of the Bolt and the safe load of the nut).
2) The length of the bolt should be selected properly, with 1-2 pitch exposed after tightening.
3) Before use, the thread should be kept clean.
2. How to use dental strips correctly
1) When tightening the teeth, pay attention to that the direction of force applied by the wrench should coincide with the axis of the screw, and do not tilt.
2) In the process of tightening, the force should not exceed the safety torque, and should be uniform. Try to use the torque wrench or socket.
3) Locking too fast will lead to locking, it is recommended not to use electric or pneumatic wrench.
4) Keep the thread clean. In order to ensure the smooth fit of screw and nut, it is recommended to put the product in a clean container and do not place it at will.
3. Standard of tooth bar maintenance
1) If there is slight damage to the removed tooth, screw and nut, the die and tap shall be used for repair.
2) The removed and repaired teeth, Screws and Nuts shall be maintained by means of oil bubble or lubricating oil, and shall be placed in order according to specifications, models and purposes.
4. Scrap standard
The bolts with obvious crack, broken thread, sliding, disorderly thread, screw tensile deformation, shear trace, etc. which can not be repaired by the on-site leader can be scrapped.
5. Specification parameters of tooth strips
Texture of material:
304/316
Product standard:
DIN975
Surface treatment:
turn into a good guy
Threaded Rods,Full Thread Rod Bolt,Hexagon Socketthread Rod Bolt,Stainless Steel Thread Rod Bolt
Suzhou Gubao Screws Co.,Ltd. , https://www.hongyiscrew.com