Haochen CAD tutorial mechanical flanged shaft parts drawing

First, let's look at a simple drawing (Figure 1). This drawing can be judged as a CAD drawing of a part, consisting of a shaft type part and a flange type part. So how is this part drawing drawn? Below, we will use the Haochen CAD Machinery 2011 software to demonstrate the drawing process for everyone.

figure 1

To draw this figure, we need to carry out a simple structural analysis: we can see that the center of the part has a hole in the center and a chamfer on the outer circle, so you can use the [shaft part design] in Haochen CAD mechanical software. The function quickly draws the main view, and then the Haochen CAD mechanical software [Accessibility] - [Create View] command to quickly generate the left view from the main view - this is also our idea of ​​drawing graphics.

Drawing steps:

1. First, we open Haochen CAD mechanical software, click [Haochen Machinery] - [Mechanical Design] - [Axis Design], and use the shaft design function to design the approximate contour of the shaft (Figure 2). .

figure 2

2. Next, we draw the hole in the center and perform the corresponding chamfering on the contour. Among them, when chamfering, you can use the [National Standard Chamfer] command in Haochen CAD mechanical software, which is more convenient and faster (Figure 3).

image 3

Optical Crystals Aspherical Lens

China Star Optics has strong and comprehensive technical capability, integrate the design and manufacture as a whole.Imported the global advanced aspherical equipment and instruments,manufactured various aspherical products,including infrared material Zinc Selenide (ZnSe),Germanium (Ge),Silicon (Si),Zinc Sulfide (ZnS) etc. Aspheric lens has already application in various high technology project and products.

Aspheric Lens

Specification of our Aspherical Lens as follow:
Material:BK7,B270 glass,PYREX,ZF13 or other optical infrared material Zinc Selenide (ZnSe),Germanium (Ge),Silicon (Si),Zinc Sulfide (ZnS) etc.
Size:10mm-200mm
Fringes:lambda/2
Center Thickness:15nm-25nm
Dispersion round:0.03mm-0.2mm
Centration:3 arc min
Surface Quality:60-40 Scratch/Dig
Clear Aperture:90%
Coating:Available upon Request

Optical Crystals Aspherical Lens,Optical Aspheric Lens,Ir Glass Aspheric Lens,Infrared Glass Aspherics Lens

China Star Optics Technology Co.,Ltd. , https://www.opticsrealpoo.com