Handmade gold foil wallpaper construction considerations
Handmade gold foil wallpaper construction notes:
1. The construction should check the moisture content of the wall (check the way: use a small iron pad under the electric iron to paste the wall to heat the wall). Or use the hair hygrometer to close the wall for 20 minutes, determine the humidity and then apply the wallpaper. If the wall (ceiling) is humid and the air humidity is high, it is necessary to use the sun lamp and the electric fan to illuminate and blow the required construction. The time should be more than 24 hours, after the moisture is reduced, the wallpaper is posted, and the wallpaper is posted. Then use the fan to blow the surface of the wallpaper for 24 hours to increase the drying speed of the wallpaper. The above operation requirements generally refer to the operation of the wall when the wall is humid and the upper surface of the building wall is poorly ventilated.
2. Wall brush varnish is selected with 93# gasoline diluted varnish, brush it once, and dry for 24 hours before posting wallpaper to keep the space on top.
3. The glue for the gold wallpaper is made of high-quality wallpaper glue. It is recommended to use Japan's alkali-based wallpaper glue construction.
4. If the construction is not checked, the humidity of the construction wall will cause the color change of the wallpaper seams at your own risk.
The three-point wood drill is a variant of the twist drill, because the conventional twist drill is easy to deviate when drilling on a flat processing surface. When drilling metal, a pilot hole is usually drilled to locate the Drill Bit. But when doing woodworking, we can have a more convenient choice. The straight tip of the three-point woodworking drill is nailed into the wood like an awl to ensure that the drill will not slip.
Wood Working Bits are cutting tools used to remove material to create different kinds of holes in wood materials. In order to create holes drill bits are usually attached to a drill, which powers them to cut through the objects.
Wood working drill Machining accuracy is good, and drilling out of the hole cleanliness is good, small burr,
Wood Working Dril,Wood Drill,Cutting Tool,Metal Cutting
Behappy Crafts (suzhou)Co.,Ltd , https://www.haoyuebehappy.com