Environmental technology is clearly effective in the application of plastic presses

In recent years, we have achieved many positive results in the process of building China's green injection molding machines, including:

Positive results in improving energy-saving technologies

In recent years, the whole industry has made new breakthroughs in improving energy-saving technologies, mainly in the following two aspects.

1. New breakthroughs in research and development of energy-saving injection molding machines

For example, actively adopt low temperature, low pressure injection molding technology, servo-variable pump drive technology, fluid-assisted injection molding technology, hot runner technology, secondary mold clamping technology, all-electric technology, isochronous temperature control technology, statistical process control technology and other technologies. Means, focusing on research and development of energy-saving injection molding machines with energy consumption lower than 0.5kw·h/kg (PS is test raw materials and tested according to relevant national standards), and has achieved remarkable results in reducing processing energy consumption.

2. A new breakthrough in the development of energy-saving plastic extrusion equipment

For example, actively adopt new and other technical means, focus on research and development of energy-saving co-directional parallel twin-screw extruders with energy consumption lower than 0.15kw·h/kg (HDPE is test raw materials and tested according to relevant national standards); Energy-saving single-screw extruder with energy consumption lower than 0.25kw·h/kg (HDPE is the test material and tested according to relevant national standards); high-speed low-cost forming auxiliary machine: research and development single-machine single-chamber production line speed is higher than 20m/min Pipe forming auxiliary machine; blown film forming auxiliary machine with R&D winding speed higher than 150m/mim, casting film forming auxiliary machine with winding speed higher than 450m/mim; obvious in energy saving and consumption reduction Results.

Positive results in setting energy efficiency standards

From July to August 2009, China Plastics Machinery Industry Association organized industry experts to conduct scientific discussions and collective examinations, and issued the “Specifications for Plastic Injection Molding Energy Consumption Testing and Rating”, which formed the first part of China's plastic machine industry. Energy-saving technical standards. At present, the standard is being reported in accordance with normal procedures, and it is expected to rise from the industry standard to the national standard. On September 28 of the previous year, the energy-saving technical standard was officially implemented in the injection molding machine industry.

Positive results in the development of green presses

Research and development of green injection molding machine products, do everything possible to reduce costs and improve economic efficiency for users, which is another new point of view in China's injection molding machine industry in recent years. For example, in July 2009, the Ningbo Municipal Economic Commission organized an appraisal committee composed of 7 famous professors and experts to carry out industrial appraisal of new products of Ma series servo energy-saving injection molding machine independently researched and developed by Ningbo Haitian Plastic Machinery Group Co., Ltd. It is unanimous that the overall technology and overall performance of this series of servo energy-saving injection molding machines have reached the domestic leading level, and the energy-saving technology has reached the international advanced level.

In addition, the new products with obvious energy-saving effects include: the new drying-free PET double-exhaust extruder developed by Shanghai Jinwei Film Membrane Equipment Manufacturing Co., Ltd. in recent years, and the all-electric injection molding independently developed by Ningbo Haitian Plastic Machine Group Co., Ltd. Machine, as well as large-scale two-plate machine with energy saving, material saving, water saving, land saving, etc., BS150 servo energy-saving injection molding machine developed by Guangzhou Bochuang Machinery Co., Ltd., SV servo energy-saving series injection molding machine produced by Donghua Machinery Co., Ltd., etc. The successful research and development of these plastic machine products has brought good economic and social benefits to the users because of the obvious effect of energy saving and consumption reduction, and has won a good reputation.
Positive results in promoting green transformation

In recent years, under the impetus of the association, leading enterprises and key enterprises in the industry have successively developed a large number of high-efficiency energy-saving technologies and products. For example, Ningbo Haitian Plastic Machine Group Co., Ltd., one of the first 91 innovative enterprises in China, has developed a number of large-scale injection molding machines, large-scale two-plate injection molding machines, and all-electric injection molding machines with independent intellectual property rights and obvious energy-saving effects. , multi-component injection molding machine, servo energy-saving injection molding machine and other products. These high-tech products are among the high-end products, some of which have reached the world's advanced level. In addition, the ultra-large injection molding machine with a injection volume of 43000g developed by Zhende Plastic Machinery Co., Ltd., the “Gran-UBE” series injection molding machine launched by Wuxi Grand Machinery Co., Ltd., HD2000 developed by Ningbo Haida Plastic Machinery Co., Ltd. Large injection molding machines and HDH300 direct injection molding machines have demonstrated the new achievements of China's plastic machine industry in accelerating green transformation and industrial upgrading.

Positive results in developing a green economy

In recent years, China's plastic machinery industry has achieved sustained and rapid development. According to statistics, from 2006 to 2008, the total industrial output value of the whole industry increased from 21.6 billion yuan to 28.043 billion yuan, an average annual increase of 14.33%; total sales increased from 21.205 billion yuan to 26.298 billion yuan, an average annual growth rate of 13.91%; The total amount increased from 595 million US dollars to 1.04 billion US dollars, with an average annual growth rate of 42.95%; total profit increased from 1.735 billion yuan to 1.583 billion yuan, an average annual growth rate of 13.15%; total assets increased from 21.115 billion yuan to 28.239 billion yuan, an average annual average The increase was 13.60%. The growth rate of these major indicators is higher than the national GDP growth, and is in the forefront of the national machinery industry. In 2009, although we have withstood the severe impact of the international financial crisis, we have experienced the adverse effects of India’s anti-dumping investigation on injection molding machines in China. However, under the great influence of the Party Central Committee and the State Council’s major decision-making department, we have worked together in the industry. The war crisis and concerted efforts to promote growth, the industry economy showed a beautiful "V" shape reversal trend, and achieved better than expected.

Since 2010, although the gloom of the international financial crisis has not been exhausted, India’s anti-dumping investigation on injection molding machines in China continues to be staged. However, the whole industry has swept the trend of the beginning of the year, and the market of plastic presses is booming and the industry economy is improving.
The main problems in building a green plastic machine in China

At present, the whole industry has made new progress in the development of green injection molding machines, and achieved good results, but there are still many problems that cannot be ignored, mainly in the following six aspects.

The task is arduous and difficult

According to statistics, in 2009, the number of enterprises above designated size has risen to 529, of which private economy accounts for more than 65%, and SMEs account for more than 98%. There are also a large number of private companies in the industry that are not on the scale. Although quite a few of them have certain economic strength, from the overall level of the industry, it is very difficult to comprehensively promote the work of building green plastic machines in China. In addition, China's plastic machinery industry covers four major categories of plastic raw material compounding machinery, plastic molding processing machinery, plastic secondary processing machinery, plastic processing auxiliary machinery or equipment, with more than 300 varieties, with an annual output of more than 250,000 units. It is the world's largest and largest producer of plastic machinery, a major consumer and a major exporter. Faced with the current situation of more varieties, lower grades and the largest output, especially the promotion of energy-saving technologies and the improvement of green competitiveness, it takes a long and arduous effort, and it will not work overnight.
Old equipment, backward technology

It is understood that there are still some small enterprises in the whole industry due to limited funds, there are problems such as old equipment, backward technology, and little technological transformation. The existence of such problems is a "bottleneck" that restricts us from building green plastic machines.

Talent shortage, low technology

Talent is the key to promoting green transformation and is fundamental to improving science and technology. The outstanding feature of China's plastic machine industry is that there are many small and medium-sized enterprises and private enterprises. Compared with large enterprises, there are often insufficient investment in science and technology, shortage of innovative talents, and insufficient innovation experience. Inadequate measures to innovate risks, as well as uncertainties in technology, market, and revenue in technological innovation, so there are problems such as low enthusiasm for innovation, difficulty in staying in innovative talents, and low ability to innovate. The products have lower grades and lower added value of products.

Green barriers, intensified

At present, increasingly serious environmental issues have become a common difficulty faced by the global economic development. The rapid development of the low-carbon economy has made the increasingly fierce low-carbon market battles quietly start. In this context, a variety of “green barriers” have been set up in developed countries and regions. With the gradual implementation of these "green barriers", China's manufacturing enterprises have been hit by unprecedented impact. Faced with these shocks and challenges, China is already a major exporter of plastic presses. It will be severely challenged and tested. If we do not change the traditional thinking concept, seize the opportunity to develop a green economy, and prepare for various preparations as soon as possible, it will bring Great negative impact.

Fortunately, extensive growth

Because some entrepreneurs do not understand enough about green manufacturing, and they are very reluctant to extensive management, they believe that traditional plastics are familiar with the road, although the profits are decreasing, but they can make money, why should they spend money on energy saving? . In particular, in the face of the current boom in the market for plastic presses, some companies believe that the production tasks have been busy enough, there is still a market for extensive operations, and the green transformation is more than one move.

Blindly follow the trend, replace transformation

Transforming the way of development is difficult to manipulate. Therefore, some "follow the wind", slammed up; some speculation, fishing and then say; some eager to seek success, sick and rushed to the doctor; some suspected "turn" and "tune" to make money slow, turn to real estate Stocks. The existence of these phenomena should be paid attention to in the plastics industry.
A rare opportunity to build a green plastic machine in China

At present, China's press industry is facing six opportunities in the process of promoting green manufacturing and building green injection molding machines.

Good opportunity for the trend of the times

Some economists predict that the development of the future industry will catch the "low carbon" and catch the winning technique. In the new round of competition with low-carbon technology and green products as the core, who can be one step ahead, who will become the biggest winner in the international market.

A rare opportunity to expand domestic demand

Since 2008, the Chinese government has successively issued a series of policies and measures to expand domestic demand and maintain growth, including 4 trillion yuan of investment plans and 10 measures to expand domestic demand, especially in accelerating the construction of affordable housing projects and accelerating rural infrastructure. Construction, speeding up the construction of major infrastructure such as railways and highways, accelerating the transformation of urban power grids, and major projects such as municipal engineering construction must be applied to plastics, especially PVC plastic products. In 2010, the Chinese government will continue to maintain the continuity and stability of macroeconomic policies, continue to implement a proactive fiscal policy and a moderately loose monetary policy, and continue to implement measures such as “cars going to the countryside”, “home appliances going to the countryside” and “trade-in”. . All of these, effectively launching domestic demand, are great opportunities for the plastics industry to promote green development.

Good opportunities for industrial revitalization

Since 2009, the State Council has successively issued ten major industrial revitalization plans. The introduction of these plans almost includes content that stimulates consumption and stimulates domestic demand. Among them, automobile, electronic information, light industry and other industries are all large-scale use and consumption of PVC series plastic products, which has played a powerful role in promoting the green development of plastics and plastic machinery industry. In addition, the plastic machinery industry and textile, steel, shipbuilding, non-ferrous metals and other industries also have a certain degree of relevance. Therefore, the adjustment and revitalization of the top ten industries have played a positive role in promoting a sales market for plastic presses. For the scientific development and long-term development of China's press industry,

LED Down Light

LED down lights are suitable for a wide range of applications, including residential place, commercial buliding, and industrial building. Down light are commonly used in homes, offices, retail stores, and other commercial spaces to provide high-quality lighting effects to light up our places and good emotion.

Most of our led down light used in OSRAM, CREE, BRIDGELUX,LIFUD,EAGLERISE,TRIDONIC led chip and driver.Therefore,our warranty is max 3-5years.

led down light,led spotlight,led spot,led ceiling light,ceiling light,indoor light,commercial lighting,down light

Jiangmen Dilin Lighting High-Tech Co., Ltd. , https://www.jmdilinled.com