Do not arbitrarily demolition of walls without bearing walls may also be useful
In the current era of high prices and low floor prices, due to economic conditions and other factors, many households have generally failed to achieve the desired goals in terms of area. So when getting the new house key to start the renovation, many owners are not satisfied with the house's structure.
“I hope that through the renovation, I will be able to use 80 square meters of spaciousness in my 60-square-meter house.†The citizen, Ms. Wang, frankly stated that the requirements for home improvement are also changing with the times and no longer confined to how to decorate the room. Beautiful, more is the hope that through the decoration of small houses grow "big belly." The only way they usually take is to “knock and beat†the original wall of the room, and to improve the existing spatial structure in the room through the renovation to increase its use.
Although some decoration masters will tell you that "in addition to the load-bearing wall can not be dismantled, the non-bearing wall can be left to you to deal with." In fact, otherwise, "existence is reasonable", non-load-bearing wall also has its role, and its demolition is also extremely There is exquisite. Not all non-load-bearing walls can be arbitrarily removed during the renovation.
In layman's terms, the so-called non-load-bearing wall refers to a column frame made of reinforced concrete. The floor is supported by a horizontal and vertical array. The array is supported by columns and the columns are supported by the foundation. This type of structure is usually visible indoors, with the majority of the walls between columns being filled with hollow bricks or ordinary bricks, which are generally non-load-bearing walls. "The non-load-bearing walls are not non-load-bearing. Their meaning is only relative to the load-bearing wall." Master Wu, a home-improvement worker, introduced that non-load-bearing walls are secondary load-bearing components, but at the same time they are also very important support sites for load-bearing walls. Because, from the actual situation, the non-load-bearing wall bears at least the weight from two parts: one part is the weight of the wall, taking the multi-storey residential building of 6 floors as an example, the non-bearing wall of the ground floor will bear the upper five layers in total The weight of the wall; the other part, from the design point of view, the non-load-bearing wall also belongs to the category of earthquake-resistant wall. In the event of an earthquake, the non-bearing wall will bear the destructive force caused by the earthquake to the house together with the bearing wall.
Therefore, in a building, if individual families remove non-load-bearing walls or make a door or window on the wall, it will have an impact on the structure. If the residents of the entire building are arbitrarily dismantling and changing the non-load-bearing walls, the useful life of the buildings will be greatly shortened. In addition, the family who are refurbishing should pay attention to the fact that the wall cannot be arbitrarily modified during the renovation, such as: piercing a hole in the load-bearing wall, removing the wall connecting the balcony and the door and window, and expanding the size of the original door and window.
Note Entrance decoration Children's room Decoration Room Home decoration Window Decoration Decoration
Borgmould Factory , http://www.hycapmould.com