Decline in profit margins, the situation of export-oriented cabinet enterprises is grim
This year, with the price of wood and the restrictions of foreign economic policies, although the sales of cabinets have increased compared with last year, but because of the decline in profit margins, export-oriented enterprises have suffered.
The first reason is that the production costs (including labor costs) of foreign cabinet enterprises are too high. The main reason why foreign merchants like Chinese cabinet products is that Chinese cabinet products have advantages in style, variety and price. Moreover, the cost of products purchased by foreign cabinet manufacturers in China is much lower than that of products produced in their own countries. More foreign companies are turning high-cost production methods to the domestic market, which makes foreign manufacturers or merchants have a lower cost. The cost of buying cabinet products is profitable. Secondly, after the financial crisis, the recovery of the global economy has also prompted the export market of domestic cabinet enterprises to improve.
At present, the impact of factors such as rising raw material prices and rising labor costs has seriously hindered the export of domestic cabinet enterprises. In addition to the financial crisis, the global economy has not fully recovered, and there are still many unstable factors. Chinese export companies have to It will take a few years to recover to the level before the financial crisis.
The situation of export-oriented cabinet enterprises is grim
Judging from the current status of cabinet exports across the country, the export volume of cabinet products from the North, Jiangsu and other regions will gradually decrease, and more export focus will shift to South China. At the same time, some companies will feel that the export situation is more complicated. The export performance of cabinet export enterprises is closely related to the cabinet industrial zone, the scale of the enterprise, the product structure, and the nature of the product. Large-scale, well-managed, and well-serviced companies will be less affected. In addition, the price of wood has risen by 20% to 30%, and the export profit of cabinets has fallen. Compared with foreign export markets, the profit of cabinet products in the domestic market is relatively higher. At present, foreign buyers, especially some new customers, are more cautious, more discerning, and stricter in choosing Chinese export products. They tend to shop around, and foreign buyers have higher environmental protection requirements for products. The density of the board is stricter.
Judging from the trend of domestic cabinet product exports, first of all, foreign buyers will transfer to industrial regions with complete industrial chains and fast services. Secondly, foreign manufacturers are more cautious about domestic cabinet products, they will choose carefully and pay more attention to prices; at the same time, the purchase volume of foreign projects will be reduced and will be transferred to other civilian uses.
For more furniture information , go to http://news.gojiaju.com/
                  Welcome to provide news interview clues Advertising / News Hotline Transfer 8004 QQ
There is a handle installed on the cabinet body in the cabinet, which is called buckle free handle in the industry. The aluminum alloy handle is directly installed on the cabinet body, so that the door panel is clean without handle.
As shown in the picture, the Black Buckle FREE handle is selected for the floor cabinet, which is directly embedded into the cabinet body. The exterior door panel has no raised handle, which is more neat. The handle of the hanging cabinet is directly hidden under the door panel and is not exposed outside. It looks cleaner.
Now let's see what this handle looks like? As shown below:
The figure above shows the C-type buckle free handle, which is generally used in the middle of the floor cabinet, drawer, bowl basket or hanging cabinet. Available colors on the market are gun color, aluminum alloy natural color, or black, and aluminum alloy bright color.
G handle aluminium profile,aluminum cabinet handle,aluminum handle for kitchen cabinet,aluminium cabinet handle,Gola aluminum profile,aluminium gola profile
The above figure is an L-shaped buckle free handle, which is generally used above the cabinet floor to facilitate the opening of the door panel. colour
The figure above shows the special buckle free handle for the hanging cabinet, which is specially installed on the bottom plate of the hanging cabinet.
---------Dimension diagram of buckle free aluminum alloy handle---------------------------
After looking at the appearance of this handle, let's talk about its installation method and the size of the handle: as shown in the figure below
This is the first type. The aluminum alloy size of the conventional circular arc cabinet is 20, the height of the middle type C is 70, the depth is 23, the height of the floor cabinet L is 55, and the units above the depth 23 {are mm}
This is the second kind. The right angle buckle free handle. The aluminum alloy size of the hanging cabinet is 20 deep, the middle C-type height is 73, and the depth is 26. The height of the L-type cabinet is 57, and the depth is 26
-----------------------------------------------
Knowing the above dimensions, we will find that the dimensions of the handle are different. Therefore, during processing and production, we need to determine the type and size of the handle before cutting the cabinet.
----Explanation of buckle free handle mode for floor cabinet installation------------
A buckle free handle shall be installed above the floor cabinet, and there shall be a 30 gap between the door panel and the table
The buckle free handle is installed and needs to be fixed with L-shaped angle iron and cabinet side plate
C-type buckle free handle shall be installed at the middle drawer of the floor cabinet
The above is the schematic diagram of the cabinet body side plate notch and the installation handle of the floor cabinet. It should be noted that the aluminum alloy buckle needs to be fixed with L-shaped angle iron. If there is a drawer in the middle, or the bowl basket needs to be notched on the middle side plate, the lower door plate exceeds the buckle by 15, the middle buckle of the middle door plate cover is 15, and 30 needs to be left between the two door plates. The distance between the uppermost door panel and the table top is also reserved at 30, which is convenient for opening the door panel.
---Explanation of buckle free handle for hanging cabinet installation-------------------------
The buckle free handle of the hanging cabinet is installed on the bottom plate of the hanging cabinet, and the bottom plate needs to be retracted 22 in front
There is a swing door in the middle of the hanging cabinet, which needs to be equipped with C-type buckle, and a 30 gap is reserved between the door panels
The above is the schematic diagram of buckle free handle for hanging cabinet installation. In conventional installation, the front of the hanging cabinet bottom plate is shortened by 22, and the aluminum alloy handle is slotted. If there is an upturned door in the middle of the hanging cabinet, it is necessary to leave a distance and install L-type handle or C-type handle. Leave 30 gaps between door panels. The middle fixed laminate shall also be moved upward according to the size of the drawing. {note: the buckle in the middle of the conventional hanging cabinet needs to open the gap on the side plate. If the side plate of the hanging cabinet leaks, the gap will not be opened}
-------Precautions in design are as follows:-------------------------------------
Note 1: the exposed part of the ground cabinet needs a light plate to cover the cabinet incision, and the ground cabinet brace needs to be installed horizontally, so that the buckle free handle L-shaped fixed angle iron can be installed on the side plate.
Corner treatment scheme of buckle free handle
The first scheme is recommended at the corner of the buckle free handle. The price of the handle door panel is high, and the handle is on the edge of the top door panel.
Note 2: since the buckle free handle is installed on the cabinet, the cabinet price needs to be high when designing the bowl and basket cabinet to avoid the plate hitting the buckle free handle as shown in the above video. The cabinet body can be 700 high, including the table top, and the skirting leg can be set to 850 high floor cabinet.
---------Buckle FREE handles can also be used in other customized furniture
Gola System Aluminium Profile,Gola Handle Aluminium Profile,Aluminum Cabinet Handle,Aluminium Cabinet Handle
GuangDong XinCheng Material CO.,LTD , https://www.xin-alu.com