Crack paint construction acceptance considerations

Did your family's woodwork brush fireproof paint? Do all the nails have anti-rust paint on their eyes? If it is not, it must be a worker cutting corners.

In a two-bedroom house, the total cost of fireproof coatings, anti-corrosion coatings, and anti-rust coatings will not exceed 200 yuan. However, the construction team often neglects these three steps in order to save time. Ruthless and incorrigible places must be constructed in accordance with safety principles.

Fire protection: Fireproof paint for wood keel can play a flame retardant role, and fire can delay the fire. Therefore, you must not omit this process. If the ceiling is used, fireproof paint must be brushed on the ceiling. The ceiling of the aluminum buckle can be omitted.

Anti-corrosion: Door backing should be coated with anti-corrosion paint (especially kitchen and toilet), kitchen and toilet ceiling with wood must brush fire anti-corrosion coating.

Anti-rust: In the place where the carpenter at home uses nails, anti-rust paint should be applied to the nails to ensure the quality.

Paint construction acceptance paint house kitchen ceiling

 A solder ring fitting, also known by the trademarked name Yorkshire fitting,is a pre-soldered capillary connector for joining copper pipes used in plumbing.While less convenient than compression joints and less reliable than flux solder joints, they are useful when fitting in confined spaces and where single handed fitting is required.
  To obtain perfect joins, the inside of the fitting and the outside of the copper pipe are cleaned using coarse steel wool, flux paste is applied, the pipe is inserted into the fitting and heat applied from a portable propane torch until a ring of solder shows at the edges of the fitting. To obtain a durable joint, water must not be poured on the solder joint to cool it. Yorkshire fittings are now made with lead-free solder.The fittings come in a great variety of configurations, such as Tee-pieces, straight couplers, elbows or bends, reducers (to join pipes of different diameters), stop-ends, and there are versions with screw threads (male or female) at one end to fit taps and galvanized iron pipes.Valves such as stoptaps & gate valves are also available in solder ring configuration.

BS864-2 Solder Ring Copper Fitting

Soldering Copper Fitting,Copper Fittings Reducing Tee,Soldering Plumbing Fittings,Soldering Reducer Coupling

Linhai Yongsheng Pipe Co.,Ltd , http://www.yspipefitting.com