Conical Twin Screw Barrel for Plastic Extruder

2024-05-10 12:05:39
  • Model NO.: customize
  • Material: Nitriding Steel
  • Nitrided Hardness: HRC56-58
  • Bimetallic Layer Hardness: HRC58-62
  • Specification: ISO 9001: 2008 approved
  • HS Code: 84779000
  • Size: Customize
  • Nitrided Layer Depth: 0.5-0.8mm
  • Bimetallic Layer Depth: 3mm
  • Trademark: ZHONGYANG
  • Origin: China
Specifications:
45/90, 45/100, 50/105, 51/105, 55/110, 55/120, 58/124, 60/125, 65/120, 65/132, 68/143, 70/140, 75/150, 80/143, 80/156, 92/188
The above are standard specifications, we can customize according to customers' requirements.
The compression ratio of screws can be designed according to different products and ingredients.

Base Materials:
(1)38CrMoAlA(JIS SACM645)
(2)42CrMo(AISI 4140)
(3)4Cr5MoSi V1 (JIS SKD-61)
(4)9Cr18MOV
(5)HPT

Bimetallic alloy materials:
1)Fe-based alloy
2)Ni-based alloy/Deloro alloy
3)Co-based alloy
4)NiCo-based alloy
5)Tungsten carbide/Wolfram carbide

Technics:
Heat treatment
High-frequency quenching
Nitriding treatment
Hard-chrome electroplating
Bimetallic alloy welding
Bimetallic alloy centrifugal casting

Technical parameter:
Nitrided layer depth: 0.5-0.8mm
Nitrided hardness: 900-1000HV
Nitrided brittleness: Less than grade 1
Surface roughness: Ra0.4
Linearity of screw: 0.015mm
Hard-chrome plating hardness after nitriding: ≥ 950HV
Chrome-plating layer depth: 0.025-0.085mm
Bimetallic layer depth: 3mm

Warranty and service: 1 year
Focus on quality and service.
Experienced manufacturer, we will be the best choice.

T Handle Hex Key

T Handle Torx Set,T Handle Hex Key,T Handle Hex Key Set,Best T Handle Hex Set

henan horn tools co.,ltd. , https://www.nbhorntoolsltd.com