Carbon Steel Grade and Cold Rolled Technique Steel Sheet
Simple Description:
| 1:Application:Roof and wall panel |
| 2:Thickness :0.12-0.8mm   tolerance:+/-0.01 |
| 3:Wave hight:16~18mm,wave pitch:76-78mm ,8-12 wave |
| 4:Wave :Raw material 762mm to 665mm(after corrugated) |
| 5:11 wave:Raw material 914mm to 800mm(after corrugated) 6:12 wave:Raw material 1000mm to 890mm or 900mm(after corrugated) |
| 1:Advanced Equipments. 2:Experienced Operater and Best Quality. 3:Convenient Transportation. 4:Competitive Price and Best Services. |
Specification :
| Thickness | 0.12mm-3.5mm |
| Thickness tolerance | ±0.02mm |
| Width | 600--1500mm |
| Width tolerance | ±2mm |
| Length | 1-6m or in coil |
| Zinc coating | 40g/m2-275g/m2 |
| Types | Commercial / Drawing / Deep Drawing / Structural quality |
| Quality | Soft or hard quality |
| Standard | ASTM, AISI, DIN, GB,JIS |
| Material | SGCC, DX51D,DX52D, DX53D,SGCD , Q195, Q235, SGHC, DX54D, S350GD, S450GD, S550GD, etc |
| Spangle State | Regular spangle, small spangle, big spangle, non-spangle |
| Surface treatment | chromed / oiled/slightly oiled/ dry/ anti-fingerprint etc |
| Coil weight | 3-8ton or up to you |
| Coil ID: | 508 /610mm |
| Packing | Standard exportation packing |
| Min order | As per specification |
| Â | |
| Â | |
| Â | Â |
Production and Equipments
Products and Packing
Customers and Cooperation
Contact Information  and Service
Rene Dai (Ms)
Mobile:+86 136 5571 9091
Â
Others Series Products
1.High Quality Die Casting Production series products.
2.Cast aluminum die cast parts in many Aluminum Die Casting for Auto parts,
Aluminium Die Casting for Communications, lamp part series, water pump
part series, power tool series, radiator part series, anti-static
flooring products and Other Series Products.
3.Die casting consulting for aluminum die casting part design and Die Casting Tooling.
4.High quality surface on your aluminum die casting products.
5.Close dimensional tolerances on products die casted in aluminum.
6.Production on aluminum die cast parts will begin in less than two weeks typically..
7.Competitively priced aluminum diecast parts.
8.Various sizes and types of aluminum diecasting capabilities for your needs.
9.A360, A380, A383 and A413, and all Aluminum Die Cast Alloy Parts comply with the EU RoHS standards.
10.Aluminum Sand Casting Parts to Aluminum Die Casting Part conversions.
11.Die Casting Machine Capacity from 50 tons to 3000 tons.
Other Series Products
Alloy Die Casting Series Products,Aluminium Die Casting,Die Casting Series Products
Ningbo Bowang Machinery Co.,Ltd , http://en.zjbwjx.com