Bathroomware Maintenance Tip: Give the shower "unloading makeup"
Give the shower faucet "cleansing makeup" every week
Showers often come in a variety of shower gels, shampoos, dishwashing detergents, etc., which make the chrome-plated surface of the faucet dull. Spray a neutral detergent on a soft cotton cloth and gently wipe the faucet once a week to give the faucet a perfect “makeupâ€. However, do not use "acid or abrasive cleaners or wire brushes" to "torture" the faucet. Scale cleaning is an inevitable task of maintaining the shower. According to the function of the shower itself, it can be hand-washed. The net cover or other parts that absorb the scale at the shower head are removed, and then cleaned with a brush and then returned to the original place. Some brands of showers are equipped with a special shower head opening tool for easy use.
Some shower holes are designed with rubber particles. The rubber material is soft and comfortable to touch, and it is not easy to scale. It is easy to clean. It can be easily smashed and popped out by simply rubbing the rubber particles with your fingers. Even if some showers have an automatic cleaning function, it is best to open the shower head after a long time of use, for a thorough manual cleaning.
Bathtub maintenance available soda powder
In general, it is better to use a neutral detergent or soap and water to clean the bathtub. Avoid using detergents for tiles or enamel surfaces. It is best to clean them once a week to ensure that the bathtub stays dry after each use. Use a neutral liquid cleaner and a flexible cloth or sponge to clean the bathtub. Corrosive cleaning agents can cause damage on the acrylic surface. Thoroughly clean the acrylic surface after each use, do not let the cleaning agent enter the circulation system; do not place the container containing the liquid detergent on the surface of the bathtub for a long time, and do not use the spray. Agent or concentrate or other similar cleaning products. Do not leave metal objects in the bathtub, they will rust the bathtub and stain the surface. In addition, the effect of using soda powder to eliminate dirt is not bad.
If you are bathing in hot spring water, there are a few points to pay special attention to. It is best to buy disinfectant water, dew drops, etc. in the pharmacy, drip in the bathtub, and disinfect the water. You can also buy a soft water machine yourself, so that the hot spring water passes through the soft water machine and then flows into the bathtub to remove minerals and impurities from the water.
The faucet recommends regular waxing
If the faucet is used for a long time, it will cause dirt and tarnish. When cleaning, avoid using detergents and wiping products that damage the polished metal surface. It is best to use the special cleaning agent provided by each brand company, and immediately rinse the residual detergent with clean water, and then use a soft damp cloth to remove residual water droplets on the surface.
As for the wiping tool, most green fiber cushions or sponges contain mineral particles, which will cause scratches on the surface of the faucet. Please pay attention to the acrylic resin. The hard water marks on the faucet can be gently wiped with 50/50 white vinegar and an aqueous solution. It is recommended to wax regularly and choose car wax or furniture wax.
Bathroom basin, avoid hot water cleaning
When cleaning, the appearance of the bathroom porcelain basin is cleaned with soft bristles or sponge with a neutral detergent, but should not be washed directly into the hot water to prevent the basin from cracking. Once the surface of the basin is formed into small scratches, it becomes rough and it is easy to deposit dirt. In addition, the water trap under the basin can be removed and maintained, and the accumulated stains can be taken out to keep the drainage smooth.
In the case of a submerged wash basin, pay special attention to the dead corners of the joint below the countertop and the basin when cleaning.
EN1423&1424 Glass Beads, blyglassbeads has classified based on the refraction, reflection ,roundness and the ratio of the beads . the micro glass beads particle is used in the thermolastic road marking reflection paint , excellent for road marking , specially to improve the visiblility at night.
Road marking glass beads,1.5 Index Glass Beads, there are BS6088 Class A, BS6088 Class B, AASHO M247 Beads, EN1423/1424 glass beads, NBR6831, Roadway Safety Glass beads, glass microspheres,Reflective glass beads, these beads are especially made for use in road marking paints and thermoplastics to provide excellent night retro-reflective.
EN1423/1424 standard glass beads are high quality glass micro spheres resulting from the specialized processing of selected glass cullet. EN1423/1424 standard glass beads is a major factor in increasing road safety in a very economical way. Thanks to the beads`retroreflective action at night, a vehicle`s headlight beam is returned to the driver`s eyes, which results in a [light-up" effect of the striping. The micro spheres not only multiply the visibility of road markings at night, but also increase the striping`s durability in general. EN1423/1424 standard glass beads are used as drop-on agent and as premix beads for road marking materials.
EN1423&1424 Glass Beads,EN1423&1424 Micro Glass Beads,EN1423&1424 Road Marking Glass Bead,high visibility EN1423&1424 Glass Beads
YONGQING BAILUYUAN GLASS PRODUCTS CO.,LTD , https://www.blyglassbeads.com